Configuration guide PASCOM®
1. Configuration guide
This configuration guide describes how to set up a Behnke Station as a SIP extension of a PASCOM® cloud PBX. We are assuming that the basic configuration of the PASCOM® system has already been done, and we will only describe the steps required to register the Behnke Station with PASCOM®. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.
1.1. Configuring the extension for the Behnke Station
Please note that the configuration of the extension is only shown very briefly and the configuration may vary for your PASCOM®. If in doubt, please contact your PASCOM® support.
-
First, please open the PASCOM® administration in your browser and log in with your admin credentials.
-
Select "Users" from the menu on the left and click "Add".
-
Fill in the fields and click "Save".
-
Confirm the message "Apply telephony config" at the top. Then go back to "Home", select "Devices" from the left menu and click "Add".
-
In the next window, select "IP phone: any manufacturer or softphone".
-
Enter a "device login name" and a "password" for the Behnke station.
-
Switch to the "Assignment" tab, click on the blue arrow behind the user that you want to assign to the Behnke Station and click on "Save".
1.2. Configuring the Behnke Station
-
Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.
-
Click on "SIP Phone" in the menu. Scroll down to "SIP account 1" and select the option "yes" for "Register".
-
Then fill in the fields with your PASCOM® SIP credentials as follows and click "Save" on the left.
Field Behnke Station Value PASCOM® Phone number/user name Device name with "@ PBX name"User ID Device name Password password Server pascom.cloud Port 5061 Transmission protocol TLS Media encryption SRTP Force media encryption yes Verify server certificates no If the registration was successful, the "Registration state" changes to registered.
-
Then click "Buttons" in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click "Save" on the left.