Configuration guide peoplefone®
1. Configuration guide
This configuration guide describes how to set up a Behnke Station as a SIP extension of a peoplefone® cloud PBX. We are assuming that the basic configuration of the peoplefone® system has already been done, and we will only describe the steps required to register the Behnke Station with peoplefone®. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.
1.1. Configuring the extension for the Behnke Station
Please note that the configuration of the extension is only shown very briefly and the configuration may vary for your peoplefone®. If in doubt, please contact your peoplefone® support.
Each Behnke Station must be registered manually on the cloud system. It is not possible to provision the Behnke Station.
-
First, start the configuration interface of your cloud system in your browser and log in with your admin credentials.
-
On the start page, click on "SIP Lines/Users" in the menu on the left, and then on "+ Add" to create a SIP user for the Behnke Station. You can find more information about this in the peoplefone® documentation.
-
Then click on "SIP Setup" for the corresponding user. There you will see the necessary information for SIP registration of the Behnke Station. This information is required in the next step.
1.2. Configuring the Behnke Station
-
Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.
-
Click on "SIP Phone" in the menu. Scroll down to "SIP account 1" and select the option "yes" for "Register".
-
Then fill in the fields with your peoplefone® SIP credentials as follows and click "Save" on the left.
Field Behnke Station Value peoplefone® Phone number/user name SIP user User ID SIP user Password SIP password Server pbxs.peoplefone.de Port 5061 Server TLS If the registration was successful, the "Registration state" changes to registered.
-
Then click "Buttons" in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click "Save" on the left.