Configuration guide Alcatel-Lucent® OmniPCX® Enterprise

1. Configuration guide

This configuration guide describes how to set up a Behnke Station as a SIP extension of a Alcatel-Lucent® OmniPCX® Enterprise. We are assuming that the basic configuration of the PBX has already been done, and we will only describe the steps required to register the Behnke Station with the OXE. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.

1.1. Configuring the extension for the Behnke Station

Please note that the configuration of the extension is only shown very briefly and the configuration may vary for your OXE. If in doubt, please contact your PBX's support.

~~WARNING:~~ The information shown here was kindly provided to us by a customer. Therefore we cannot guarantee that it is complete and up-to-date.

1.2. Configuring the Behnke Station

Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.
Click on "SIP Phone" in the menu. Scroll down to "SIP account 1" and select the option "yes" for "Register".
Then fill in the fields with your OXE's SIP credentials as follows and click "Save" on the left.

Field Behnke Station Value OXE

Phone number/user name extension

User ID extension

Password SIP password

Server IP address of the OXE

Port 5060

If the registration was successful, the "Registration state" changes to registered.
Then click "Buttons" in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click "Save" on the left.