Help for the reventix Cloud Phone System
1. Setup guide
This setup guide describes how to put a Behnke Station into operation as a SIP subscriber on a reventix cloud phone system. It is assumed below that the basic configuration of the reventix cloud phone system has already been done, and we limit ourselves exclusively to the steps required to commission the Behnke Station.
It is assumed that the Behnke-Station is already set up to the extent that access to the web interface is possible. If this is not the case, please follow the instructions provided with your base electronics (manuals) and refer to the technical manualRecently updated — within the last 72 hours to complete the basic setup.
1.1. Setting up the subscriber for the Behnke Station
The following section contains only the steps required to create a user. The setup may differ in your installation. If in doubt, please contact your PBX support.
Note
Each Behnke Station must be registered manually on the cloud system. It is not possible to provision the Behnke Station.
- Open the reventix® management console in your browser.
- Log in with your administrator account.
- Go to the sidebar on the left.
- Click the menu item Telefonanlage (Phone system).
- A menu expands.
- Click Nebenstellen (Extensions) there.
- Click Assistent zur Einrichtung einer neuen Nebenstelle (Wizard for setting up a new extension) to start the setup.
- Select a suitable value for the field Rufnummer unter der Sie erreichbar sind (Number at which you can be reached).
- Fill in the input field Absender-Name (intern) (Sender name (internal)).
- Fill in the input field Absender-Rufnummer (extern) (Sender number (external)).
- Fill in the input field Absender-Name (extern) (Sender name (external)).
- Click the Speichern (Save) button.
- Go to the sidebar on the left.
- Click the menu item Telefonanlage (Phone system).
- A menu expands.
- In the list of extensions, go to the extension you created earlier.
- Click the action Detailübersicht dieser Nebenstelle (Detail overview of this extension).
- Make a note of this information, as you will need it to configure the Behnke Station.
1.2. Configuring the Behnke Station
- Open your browser
- Access the Behnke Station web interface
- Log in
- Click the
- Navigate to the SIP Account 1 or SIP Account 2 section.
- Set the Register option to yes
- Use the assignments from the following table and enter the information in the corresponding input fields (in the SIP Account 1 section, if applicable SIP Account 2) of your Behnke station.
- Open your browser
- Go to the web interface of the Behnke Station
- Log in
| Behnke Station field | reventix value |
|---|---|
| Phone number/user name | Extension user ID |
| User ID | Extension user ID |
| Password | Extension password |
| Server | pbx.sipbase.de |
- Click in the sidebar to save the configuration
- Wait a moment until the Behnke Station is reachable again
- If the registration is successful, the Registration state option changes to the value registered
- If this is not the case, please check the previous steps again
- Click the menu item in the sidebar to save the configuration
- Navigate to the section of the button to be configured, e.g. Button 1
- Set the Action option to the value Call
- In the input field of the Phone number option, enter the number that should be called when the button is pressed
- Click in the sidebar to save the configuration
The configuration of the Behnke Station was last updated for version 5.26.
2. FAQ
Note
There is currently no content available here yet. As soon as content is planned, the pages will be marked as planned. Feel free to use the Report a problem function on the right in the toolbar to request new content, ask questions, or report anything that is unclear.
You can also give feedback after every heading, so that we can continuously improve our wiki:
- Move your mouse over the heading
- A small ? appears
- Click the small ?
We welcome every suggestion, every correction and every idea for improvement.