CameraRecently updated — within the last 72 hours

1. Menu item "Camera"

1.1. Configuration guides

---WIKI page_id: einrichtung-kamera

IP camera as system camera for SIP video callsRecently updated — within the last 72 hours

1.2. Trouble shooting

---WIKI page_id: probleme-kamera

Behnke Station doesn't find the cameraRecently updated — within the last 72 hours

2. IP video software

2.1. Manual

2.2. Configuration guides

---WIKI page_id: einrichtung-ipvideo

Behnke Station, camera and IP video software in the same IP address rangeRecently updated — within the last 72 hours
Behnke Station and camera in different IP address range than IP video softwareRecently updated — within the last 72 hours
IP video software in Terminal server environmentRecently updated — within the last 72 hours
Direct SIP calls and IP video softwareRecently updated — within the last 72 hours
Behnke Station in operation mode "analogue phone"Recently updated — within the last 72 hours
Manually adding a cameraRecently updated — within the last 72 hours
Analogue Behnke phone with one button and IP cameraRecently updated — within the last 72 hours
Analogue Behnke phone with multiple buttons and IP cameraRecently updated — within the last 72 hours

2.3. Trouble shooting

---WIKI page_id: probleme-ipvideo

Was this page helpful?

If the procedures documented here do not work:

Make sure the latest firmware is installed on your Behnke-Station. The latest version is 6.33 and can be downloaded here.
Check the notes in the manual and in the manuals.

If none of the above tips help, open a new support ticket or contact our service hotline.

Last modified on October 14, 2026 (today)Edited byMoScMaH1 min read1.656 Views