Enabling and Accessing the Weblog
The Behnke Station continuously records log data during operation. This log data can be retrieved and specifically filtered using the "Weblog" function. The Weblog enables structured and efficient troubleshooting (for example, to analyze problems with SIP registration).
It is assumed that the Behnke-Station is already set up to the extent that access to the web interface is possible. If this is not the case, please follow the instructions provided with your base electronics (manualsThis page carries no version. This notice is generated automatically and was not written by an editor.) and refer to the technical manualRecently updated — within the last 72 hoursThis page carries no version. This notice is generated automatically and was not written by an editor. to complete the basic setup.
1. Setup Guide
- Open your browser
- Go to the web interface of the Behnke Station
- Log in
- Click the menu item in the sidebar
- Navigate to the Weblog section
- Set the value of the option Enable Weblog to yes
- Open a new tab in your browser
- Enter the IP address in your browser's address bar
- Instead of your administrator password, enter the password
weblog - The Weblog opens
2. FAQ
Note
There is currently no content available here yet. As soon as content is planned, the pages will be marked as planned. Feel free to use the Report a problem function on the right in the toolbar to request new content, ask questions, or report anything that is unclear.
You can also give feedback after every heading, so that we can continuously improve our wiki:
- Move your mouse over the heading
- A small ? appears
- Click the small ?
We welcome every suggestion, every correction and every idea for improvement.