Configuring a Behnke intercom station in hybrid mode with a Behnke indoor station, two SIP servers and an analog telephone system
Machine-translated
1. Introduction
This setup guide describes how to configure a Behnke intercom station in hybrid mode so that it can dial different call destinations.
The intercom station is, at the same time:
- registered with two SIP servers
- operated in intercom mode
- connected to an analog telephone system
This allows different end devices to be called via different communication paths. It is assumed that:
all devices have already been started the basic initial setup has been completed valid IP addresses have been assigned the web interfaces are accessible both SIP servers are operational
2. Setup overview
Functional description
In this scenario, the intercom station supports several call destinations:
- Indoor station via intercom
- IP phone via internal SIP server
- Smartphone with Linphone app via cloud SIP server
- Analog telephone via analog telephone system
Systems used
Intercom station Operating mode: Hybrid Intercom: Group 1
Remote stations
- Indoor station (intercom group 1)
- IP phone (registered with the internal SIP server)
- Smartphone with Linphone app (registered with the cloud SIP server)
- Analog telephone (connected to the analog telephone system)