{"wiki":"en","slug":"swisscom","markdown":"\n\n# Configuration guide Swisscom®\n\n## 1. Configuration guide\n\nThis configuration guide describes how to set up a Behnke Station as a SIP extension of a SWISSCOM® cloud PBX. We are assuming that the basic configuration of the SWISSCOM® system has already been done, and we will only describe the steps required to register the Behnke Station with SWISSCOM®. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.\n\n### 1.1. Configuring the Behnke Station\n\n- Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.\n\n \n\n- Click on **\"SIP Phone\"** in the menu. Scroll down to **\"SIP account 1\"** and select the option **\"yes\"** for **\"Register\"**.\n\n \n\n- Then fill in the fields with your SWISSCOM® SIP credentials as follows and click **\"Save\"** on the left.\n\n | Field Behnke Station | Value SWISSCOM® |\n | ---------------------- | ------------------------------------------------------------- |\n | Phone number/user name | `@swisscom.ch`, e.g. `+41123456789@swisscom.ch` |\n | User ID | User ID, e.g. `XX000001234567` |\n | Password | password |\n | Server | **fs1.ims.swisscom.ch** |\n \n If the registration was successful, the **\"Registration state\"** changes to **{+registered+}**.\n\n \n\n- Then click **\"Buttons\"** in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click **\"Save\"** on the left.\n\n \n\n## 2. Trouble shooting\n\n## 3. Legal notices\n\n[Legal notices](legal notices)","lastModified":"2026-08-20T14:30:11+02:00"}