{"wiki":"en","slug":"starface-compact","markdown":"\n\n# Help for Starface® Compact SIP v2\n\n\n## 1. Setup guide\n\nThis setup guide describes how to put a Behnke Station into operation as a SIP subscriber on a STARFACE® COMPACT v2 telephone system. In the following, we assume that the basic configuration of the STARFACE® COMPACT v2 telephone system has already been carried out, and we limit ourselves exclusively to the steps required to put the Behnke Station into operation.\n\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\n\n\n### 1.1. Setting up the subscriber for the Behnke Station\n\n%[NOTE_MINIMAL_SETUP_OF_TK_USER](NOTE_MINIMAL_SETUP_OF_TK_USER)%\n\n- Open the STARFACE® administration console in your browser.\n- Log in with your administrator account.\n\n\n\n- Go to the menu bar at the top.\n- Click the menu item **Admin**.\n\n\n\n- Go to the sidebar on the left.\n- Click the menu item **Telefone** (Phones) there.\n\n\n\n- Click the **+** button on the right.\n\n\n\n- Choose a **phone name** and fill in the corresponding input field.\n- Choose a **password** and enter it in the corresponding field.\n- Make a note of this information, as it is needed to configure the Behnke Station.\n- Switch to the **Erweiterte Einstellungen** (Advanced settings) tab.\n\n\n\n- Go to the section **Türsprechstelle** (Door intercom).\n- Activate the option **Einschalten** (Enable).\n- If your Behnke Station has a camera, follow these steps:\n - In the field **Kamera-URL** (Camera URL), enter the address of the station's MJPG stream:\n\n ```\n http://:8080/?key=&.mjpg\n ```\n\n - In the field **DTMF**, enter the code for opening the door. By default, this is `0#`.\n\n- Click **Übernehmen** (Apply) and then **Speichern** (Save).\n\n\n\n- Go to the sidebar on the left.\n- Click the menu item **Benutzer** (Users) there.\n\n\n\n- Now click the **+** button on the right.\n\n\n\n- Enter the following details:\n - **Passwort** (Password)\n - **Nachname** (Last name)\n - **Vorname** (First name)\n - **E-Mail-Adresse** (Email address)\n- Choose an **internal phone number**.\n- Go to the section **Telefonzuordnung** (Phone assignment).\n- Assign the previously created phone to the user.\n- Click **Übernehmen** (Apply) and then **Speichern** (Save).\n\n\n\n\n### 1.2. Configuring the Behnke Station\n\n%[SIP_KONFIGURATION_BS_1](SIP_KONFIGURATION_BS_1)%\n\n | Behnke Station field | STARFACE® value |\n | -------------------------------- | -------------------------- |\n | Phone number/Username | Phone name |\n | User ID | Phone name |\n | Password | Password |\n | Server | IP address of your STARFACE® |\n \n%[SIP_KONFIGURATION_BS_2](SIP_KONFIGURATION_BS_2)%\n\n\n## 2. FAQ\n\n%[NO_CONTENT](NO_CONTENT)%\n","lastModified":"2026-10-14T13:47:15+02:00"}