{"wiki":"en","slug":"peoplefone","markdown":"# Configuration guide peoplefone®\n\n## 1. Configuration guide\n\nThis configuration guide describes how to set up a Behnke Station as a SIP extension of a peoplefone® cloud PBX. We are assuming that the basic configuration of the peoplefone® system has already been done, and we will only describe the steps required to register the Behnke Station with peoplefone®. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.\n\n### 1.1. Configuring the extension for the Behnke Station\n\nPlease note that the configuration of the extension is only shown very briefly and the configuration may vary for your peoplefone®. If in doubt, please contact your peoplefone® support.\n\nEach Behnke Station must be registered manually on the cloud system. It is not possible to provision the Behnke Station.\n\n- First, start the configuration interface of your cloud system in your browser and log in with your admin credentials.\n\n  ![Login screen of the peoplefone® configuration interface]()\n\n- On the start page, click on **\"SIP Lines/Users\"** in the menu on the left, and then on **\"+ Add\"** to create a SIP user for the Behnke Station. You can find more information about this in the peoplefone® documentation.\n\n  ![\"SIP Lines/Users\" page in the peoplefone® configuration interface]()\n\n- Then click on **\"SIP Setup\"** for the corresponding user. There you will see the necessary information for SIP registration of the Behnke Station. This information is required in the next step.\n\n  ![\"SIP Setup\" with the SIP credentials for the Behnke Station in peoplefone®]()\n\n### 1.2. Configuring the Behnke Station\n\n- Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.\n\n  ![Login screen of the Behnke Station's web interface]()\n\n- Click on **\"SIP Phone\"** in the menu. Scroll down to **\"SIP account 1\"** and select the option **\"yes\"** for **\"Register\"**.\n\n  ![SIP account 1 in the \"SIP Phone\" menu of the Behnke Station]()\n\n- Then fill in the fields with your peoplefone® SIP credentials as follows and click **\"Save\"** on the left.\n\n   | Field Behnke Station   | Value peoplefone®  |\n   | ---------------------- | ------------------ |\n   | Phone number/user name | SIP user           |\n   | User ID                | SIP user           |\n   | Password               | SIP password       |\n   | Server                 | pbxs.peoplefone.de |\n   | Port                   | 5061               |\n   | Server                 | TLS                |\n  \n  If the registration was successful, the **\"Registration state\"** changes to **{+registered+}**.\n\n  ![Registration state \"registered\" in the Behnke Station's web interface]()\n\n- Then click **\"Buttons\"** in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click **\"Save\"** on the left.\n\n  ![Call number of a call button in the \"Buttons\" menu of the Behnke Station]()\n\n## 2. Trouble shooting\n\n## 3. Legal notices\n\n[Legal notices](legal notices)","lastModified":"2026-08-20T14:30:11+02:00"}