{"wiki":"en","slug":"pascom","markdown":"# Configuration guide PASCOM®\n\n## 1. Configuration guide\n\nThis configuration guide describes how to set up a Behnke Station as a SIP extension of a PASCOM® cloud PBX. We are assuming that the basic configuration of the PASCOM® system has already been done, and we will only describe the steps required to register the Behnke Station with PASCOM®. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.\n\n### 1.1. Configuring the extension for the Behnke Station\n\nPlease note that the configuration of the extension is only shown very briefly and the configuration may vary for your PASCOM®. If in doubt, please contact your PASCOM® support.\n\n- First, please open the PASCOM® administration in your browser and log in with your admin credentials.\n\n  ![Login screen of the PASCOM® administration]()\n\n- Select **\"Users\"** from the menu on the left and click **\"Add\"**.\n\n  ![\"Users\" page with the \"Add\" button in the PASCOM® administration]()\n\n- Fill in the fields and click **\"Save\"**.\n\n  ![User settings for the Behnke Station in the PASCOM® administration]()\n\n- Confirm the message **\"Apply telephony config\"** at the top. Then go back to **\"Home\"**, select **\"Devices\"** from the left menu and click **\"Add\"**.\n\n  ![\"Devices\" page with the \"Add\" button in the PASCOM® administration]()\n\n- In the next window, select **\"IP phone: any manufacturer or softphone\"**.\n\n  ![Device type \"IP phone: any manufacturer or softphone\" in the PASCOM® administration]()\n\n- Enter a **\"device login name\"** and a **\"password\"** for the Behnke station.\n\n  ![Device login name and password for the Behnke Station in the PASCOM® administration]()\n\n- Switch to the **\"Assignment\"** tab, click on the blue arrow behind the user that you want to assign to the Behnke Station and click on **\"Save\"**.\n\n  ![\"Assignment\" tab with the user assigned to the Behnke Station]()\n\n### 1.2. Configuring the Behnke Station\n\n- Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.\n\n  ![Login screen of the Behnke Station's web interface]()\n\n- Click on **\"SIP Phone\"** in the menu. Scroll down to **\"SIP account 1\"** and select the option **\"yes\"** for **\"Register\"**.\n\n  ![SIP account 1 in the \"SIP Phone\" menu of the Behnke Station]()\n\n- Then fill in the fields with your PASCOM® SIP credentials as follows and click **\"Save\"** on the left.\n\n   | Field Behnke Station       | Value PASCOM®                      |\n   | -------------------------- | ---------------------------------- |\n   | Phone number/user name     | Device name with **\"@`PBX name`\"** |\n   | User ID                    | Device name                        |\n   | Password                   | password                           |\n   | Server                     | pascom.cloud                       |\n   | Port                       | 5061                               |\n   | Transmission protocol      | TLS                                |\n   | Media encryption           | SRTP                               |\n   | Force media encryption     | yes                                |\n   | Verify server certificates | no                                 |\n  \n  If the registration was successful, the **\"Registration state\"** changes to **{+registered+}**.\n\n  ![Registration state \"registered\" in the Behnke Station's web interface]()\n\n- Then click **\"Buttons\"** in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click **\"Save\"** on the left.\n\n  ![Call number of a call button in the \"Buttons\" menu of the Behnke Station]()\n\n## 2. Trouble shooting\n\n## 3. Legal notices\n\n   [Legal notices](legal notices)","lastModified":"2026-08-20T14:30:11+02:00"}