{"wiki":"en","slug":"konfig-snmp","markdown":"# Configuring and Using SNMP\n\nThe Behnke Station supports the Simple Network Management Protocol (SNMP), which allows the device to be monitored and managed centrally over the network.\n\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\n\n<!-- block: einrichtungshilfe -->\n## 1. Setup Guide\n\n%[BS_LOGIN_INFO](BS_LOGIN_INFO)%\n\n<!-- block: aktivieren-in-der-behnke-station -->\n### 1.1 Enabling on the Behnke Station\n\n%BS_MENU_GOTO_NETZWERK%\n\n- Scroll to the **SNMP** section\n\n![Behnke Station / Network / SNMP](uploads/5fed88c17a3b0e3f0a284a215d62ba81/grafik.png)\n\n- Set the value of the **Enable SNMP** option to **yes**\n\n![Behnke Station / Network / SNMP](uploads/198e589c2c972ee1389cfb70eb28eee9/grafik.png)\n\n- Set the value of the **Permitted access** option to the desired value (Read / Read and write)\n- Set the value of the **Authentication algorithm** option to the value required by your system (e.g. **SHA-512**)\n- Create a **secure password** and set the value of the **Authentication password** option accordingly\n- Set the value of the **Encryption algorithm** option to the value required by your system (e.g. **AES256**)\n- Create a **secure password** and set the value of the **Encryption password** option accordingly\n- Download the **Management Information Base (MIB)** and import it into your system\n\n<!-- block: beispiele-zur-nutzung-mit-cli-tools -->\n### 1.2 Examples of Use with CLI Tools\n\nThis image shows some examples that were created on Linux (Ubuntu 24.04) using the tools `snmpget` and `snmpset`.\n\n![Behnke Station / Network / SNMP / Examples](uploads/642fcccf224ee6e04da099fd7e9cf7cb/grafik.png)\n\n<!-- block: faq -->\n## 2. FAQ\n\n%[NO_CONTENT](NO_CONTENT)%\n","lastModified":"2026-10-14T13:47:15+02:00"}