{"wiki":"en","slug":"innenstation-bsp-hybrid-indoor-zweisipserver-analaogetkanlage","markdown":"# Configuring a Behnke Intercom Station in Hybrid Mode with a Behnke Indoor Station, Two SIP Servers and an Analog Telephone System\n\n\n<!-- block: einleitung -->\n## 1. Introduction\n\nThis setup guide describes how to configure a Behnke intercom station in hybrid mode in order to dial different call destinations.\n\nThe intercom station is at the same time:\n\n- registered with two SIP servers\n- operated in intercom mode\n- connected to an analog telephone system\n\nThis allows different end devices to be called via different communication paths.\nIt is assumed that:\n\nall devices have already been started\nthe basic initial commissioning has been carried out\nvalid IP addresses have been assigned\nthe web interfaces are reachable\nboth SIP servers are operational\n\n<!-- block: aufbauuebersicht -->\n## 2. Setup Overview\n\nFunctional description\n\nIn this scenario, the intercom station supports several call destinations:\n\n- Indoor station via intercom\n- IP phone via internal SIP server\n- Smartphone with Linphone app via cloud SIP server\n- Analog phone via analog telephone system\n\nSystems used\n\nIntercom station\nOperating mode: Hybrid\nIntercom: Group 1\n\nRemote stations\n\n- Indoor station (intercom group 1)\n- IP phone (registered with the internal SIP server)\n- Smartphone with Linphone app (registered with the cloud SIP server)\n- Analog phone (on the analog telephone system)\n\n![Beispiel_Hybrid Aufbau](uploads/b228691e2a9a924a376d1835ad33694d/Beispiel_d2.png)\n\n<!-- block: konfiguration-der-sprechstelle -->\n## 3. Configuring the Intercom Station\n\n3.1 \"General\" menu\n\nThe following settings are made in the \"General\" menu:\n\n- Operating mode: Intercom\n- Hybrid mode: Yes\n- Device name: e.g. \"Main entrance\"\n\n![Hybridmodus_und_Sprechanlage_](uploads/cb96f941f52819172642a653ba0b7a0d/Hybridmodus_und_Sprechanlage_.jpg)\n\nThe hybrid operating mode enables the combination of:\n\n- Intercom calls\n- SIP calls\n- Analog phone calls\n\n3.2 \"Intercom\" menu\n\nIn the \"Intercom\" menu:\n\n- Group: 1\n\n![Sprechstelle_Gruppe_1_1247x915](uploads/299d33b00816a9871c71d2b10a2eb1b9/Sprechstelle_Gruppe_3_1247x915.jpg)\n\n\nThis allows the intercom station to call indoor stations within the group.\n\n3.3 \"SIP\" menu\n\nThe intercom station is registered with two SIP servers.\n\nSIP account 1 (internal SIP server)\n\nEnter:\n\nSIP server address\n\n- Phone number/user name:\n- User ID:\n- Password:\n- SIP server address:\n\nEnable registration\n\nThis account is used for internal IP phones.\n\nHere is the link to setting up one or two SIP accounts:\n\n- [Registration with two different SIP accounts at the same time](different-SIP-accounts)\n\nSIP account 2 (cloud SIP server – Linphone)\n\n\n- Phone number/user name:\n- User ID:\n- Password:\n- SIP server address:\n\nEnable registration\n\n- [Linphone® Free SIP Service](Linphone-FreeSIP)\n\nThis account is used for the connection to the Linphone smartphone app.\n\nAfter configuration, both accounts must show the **status \"registered\"**.\n\n\n3.4 Button assignment\n\nVarious call types can be stored in the \"Buttons\" menu.\n\n- Button 1\n\n  Call an analog phone\n  Example:\n\n  ana:phone number\n  ana = analog telephone system\n\n  Phone number = destination number\n\n  Example:\n  ana:1234\n\n  → calls the analog phone with extension 1234.\n\n- Button 2\n\n  Call an IP phone via SIP server 1\n  Example:\n\n  sip1:200\n\n  sip1 = SIP account 1 (internal SIP server)\n\n  200 = extension of the IP phone\n\n- Button 3\n\n  Call an indoor station\n\n  Example:\n\n  com:1\n\n  → calls ID 1 within group 1\n\n- Button 4\n\n  Call a smartphone via Linphone\n\n  Example:\n\n  sip2:100\n\n  sip2 = cloud SIP server\n\n  100 = SIP user of the Linphone app\n\n![Tasten_Belegung_Hybridmodus](uploads/e03ce02ffcd29d0e4c8f2258b733c0e9/Tasten_Belegung_Hybridmodus.jpg)\n\n<!-- block: konfiguration-der-innenstation -->\n## 4. Configuring the Indoor Station\n\n\"General\" menu\n\n- Operating mode: IP intercom\n- Device name: e.g. \"Indoor station office\"\n\n![Betreibsart_und_Name_Innenstation](uploads/3f93c12eb94f83906c2a28ea096aa915/Betreibsart_und_Name_1247x915.jpg)\n\n\n\"Intercom\" menu\n\n- Group: 1\n- ID: 1\n\n![IP-Sprechanlage_Innensprechstelle_Gruppe_ID_](uploads/233db647637357b744b731ad62e178b1/IP-Sprechanlage_Innensprechstelle__Gruppe_ID_1247x915.jpg)\n\nThis allows the indoor station to be called from the intercom station via com:1.\n\n<!-- block: gegenstellen -->\n## 5. Remote Stations\n\nIn this scenario, the following devices have already been set up:\n\n- IP phone\n\n  registered with SIP server 1\n  reachable via its SIP extension\n\n- Smartphone with Linphone\n\n  Linphone app installed\n  registered with the cloud SIP server\n\n- Analog phone\n\n  connected to an analog telephone system\n  reachable via its extension\n\n<!-- block: funktionspruefung -->\n## 6. Function Test\n\nAfter completing the configuration, the following tests should be carried out:\n\n1. Press the button with com:1\n→ Indoor station rings\n2. Press the button with sip1:number\n→ IP phone rings\n3. Press the button with sip2:number\n→ Linphone app rings\n4. Press the button with ana:number\n→ Analog phone rings\n\n<!-- block: technischer-hinweis -->\n## Technical Note\n\nThe hybrid operating mode enables the simultaneous use of:\n\n- Intercom calls (com:)\n- SIP calls (sip1: / sip2:)\n- Analog phone calls (ana:)\n\nThis makes it possible to combine different communication systems in one installation.\n","lastModified":"2026-10-14T13:47:15+02:00"}