{"wiki":"en","slug":"help-platform","markdown":"# Determining the platform of the Behnke station\r\n\r\nThe Behnke station is available in two platform variants, each requiring its own firmware file. This guide explains how to identify the platform of your station so you can select the appropriate firmware.\r\n\r\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\r\n\r\n> [!IMPORTANT]\r\n> Please check the following:\r\n> A Behnke station is classified as **Platform P1** if **at least one** of the following criteria applies:\r\n>\r\n> * The firmware version is **earlier than version 6.33**, or\r\n> * the device was **delivered before May 15, 2026**.\r\n>\r\n> If neither of these criteria applies, please follow the instructions below to determine the platform of your Behnke station.\r\n\r\n## Identifying the platform\r\n\r\n- Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.\r\n\r\n![BS login screen](uploads/32cf1a86510b4b27234a130e5f8f4ca6/3CX_E_06.png)\r\n\r\n- On the sidebar click %[BS_MENU_SYSTEM](BS_MENU_SYSTEM)%\r\n- Navigate to the **Information** section\r\n- Navigate to the **Platform** option\r\n\r\n### Example platform 1:\r\n\r\n![Example platform 1](uploads/af4e626934013774dffdb8dbdd0692a9/grafik.png)\r\n\r\n### Example platform 2:\r\n\r\n![Example platform 2](uploads/fc426642da6f9ed86ac9ea17190f493f/grafik.png)\r\n\r\n- Now select the firmware file for your platform (P1 or P2) from the overview\r\n\r\n%[LEGAL_NOTES](LEGAL_NOTES)%","lastModified":"2026-07-14T10:07:05+02:00"}