{"wiki":"en","slug":"guide-system-restart","markdown":"# Restarting the Behnke Station\n\nThis setup guide describes the different ways to restart the Behnke Station.\n\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\n\n<!-- block: neustart-ueber-die-weboberflaeche -->\n## 1. Restart via the web interface\n\n%[BS_LOGIN_INFO](BS_LOGIN_INFO)%\n\n- In the sidebar on the left, click the menu item %BS_MENU_SYSTEM%\n- Navigate to the section that contains several buttons\n\n![Web interface section with direct actions](uploads/7f49bba404116aa66260b522f3aea8d0/grafik.png)\n\n- Look for the **System** option\n- Click the **Restart** button\n- Confirm the restart in the dialog\n- The system restarts\n- After 60-90 seconds, the system should be ready for operation again\n\n<!-- block: neustart-ueber-die-einstellungen-im-display-bei- -->\n## 2. Restart via the settings on the display (for Behnke indoor intercom station)\n\n> [!CAUTION]\n> This method only works with a **Behnke indoor intercom station** that is operating in the (main) operating mode **IP intercom**.\n\n- Go to the monitor of your **Behnke indoor intercom station**\n- Tap the **gear icon** in the bottom right corner\n- You will be asked to enter the administrator password\n- An overview page appears\n- Select **Settings of this device** there\n- From the next list, select the entry **System**\n- Navigate to the entry **Restart**\n- Confirm the restart in the dialog\n- The system restarts\n- After 60-90 seconds, the system should be ready for operation again\n\n<!-- block: faq -->\n## 3. FAQ\n\n%[NO_CONTENT](NO_CONTENT)%\n","lastModified":"2026-10-14T13:47:15+02:00"}