{"wiki":"en","slug":"einstellung-statischer-ip-adresse-von-dnake-und-behnke-station","markdown":"# Configuring a Static IP Address on the DNAKE A416 W Indoor Station\n\nThis setup guide describes how to assign a static IP address to a DNAKE A416 W indoor station.\n\n\n## 1. Configuring the DNAKE A416 W Indoor Station\n\nFor the setup, we assign the following static IP addresses:\n\n- DNAKE A 416: 192.168.0.10\n- Behnke Station: 192.168.0.20\n\nThe goal is for the Behnke Station to call the IP address 192.168.0.10 when a button is pressed.\n\n- After the DNAKE A 416 has started, swipe left.\n\n![Home screen](uploads/b9bd1d292f59c6badd34313ed06a495e/IMG_6110_1.JPG.png)\n\n- Select Settings.\n\n![Home screen, second screen](uploads/572fc26f2ccd5b7a3b8a30a63b470d74/IMG_6111_22.jpg)\n\n- Select More.\n\n![Advanced settings](uploads/330ee075af7da99ce0512b6a9c2e1e57/IMG_6112_33.jpg)\n\n- Enter the PIN (123456).\n\n![Password entry](uploads/80a56789e017535fe11ab50797a8902c/IMG_6113_4.JPG)\n\n- Press OK.\n\n![Password confirmation](uploads/2fc1a561edb6cc013a214a62129d3c2b/IMG_6114_5.JPG)\n\n- Select Ethernet.\n\n![Select Ethernet](uploads/d0a9280576568ccacfb76d4fdf554dba/IMG_6122_66.jpg)\n\n\n- Enter the following data:\n\n1. IP: 192.168.0.10\n2. Subnet mask: 255.255.255.0\n3. Gateway: 192.168.0.1.\n\nPressing the green arrow takes you automatically to the next field to be filled in.\n\n![IP settings](uploads/e337c0f04b2f06cb4c30b2e2a439debb/IMG_6120_77.jpg)\n\n\n- To save, press the checkmark.\n\n![Save](uploads/77e7306cdbeeff04ae2c53b210473f93/Ethemet_Speichern_Pfeil.png)\n\n- To confirm, enter the password (123456) again and confirm with OK.\n\n\n![Confirm saving](uploads/2fc1a561edb6cc013a214a62129d3c2b/IMG_6114_5.JPG)\n\n# Configuring a Static IP Address on the Behnke Station\n\n- After the Behnke Station starts, it assigns itself a link-local address.\n\nLink-local refers to the self-assignment of an IP address, intended for networks without a DHCP server. In this case, the device automatically assigns itself a free IP address in the range 169.254.0.0/16. The assigned IP address can be retrieved by pressing the configuration button twice.\n\n![Connections](uploads/e9f25a93aafafcb46424739ed1c474c2/Elektronikbox_-tatser1.jpg)\n\n- Assign the PC or notebook in the network an available link-local IP address that differs from the IP address of the door station. Otherwise, an IP address conflict may occur.\n\n\n- First, open the IP address you determined in your browser and log in to the web interface of the Behnke Station with the user name 'Admin'.\n\n![BS 03 start screen](uploads/4609db5a3874057b350f382d5990bb41/Startbild.jpg)\n\n- Select Buttons.\n\n![Button selection](uploads/a464d294c746c1dd692b44cd3b214bbd/Basiskonfig_2_tasten_auswahlen.jpg)\n\n- Enter the IP address to be dialed under Button 1 Phone number. In our example: 192.168.0.10\n\n![Buttons/phone number/IP address](uploads/d34922e7fdf0a4459125b99703b3596f/Taste_4_mit_Pfeil.jpg)\n\n- Set SIP phone/SIP direct call to **Yes**.\n\n![SIP direct call](uploads/c982ef42123c31d96defde9d894207b6/sipdirekruf_mir_ja.png)\n\n- Select Network and change the IP address assignment to static.\n Then enter:\n\n 1. IP address (example 192.168.0.20)\n 2. Network mask (example 255.255.255.0)\n 3. Gateway (example 192.168.0.10)\n 4. Save\n\nBoth devices should now have a static IP address.\n\n\n![Network settings](uploads/77b671dc84e6c4045bbced1ac193f16e/Netzwerkeinstellung_3_markierung_.jpg)\n\n\n- Register the Behnke Station with itself.\n\nTo do this, select SIP phone.\n\n![SIP registration](uploads/0b6973d304089e29b221d16fdefe66f1/Sip_anmeldung.png)\n\n\nSet SIP account 1 to 'Yes' and enter the following information according to our example: \n\n1. Phone number: 100 \n2. User ID: 100 \n3. Password: 100\n4. SIP server: 192.168.0.20 \n\n- After saving, make sure it shows as registered. \n\n![registered](uploads/07252d3480339edb89500d505d430d34/Am_sipserver_regestriert.png)\n\n\n\n## 2. FAQ\n\n%[NO_CONTENT](NO_CONTENT)%\n","lastModified":"2026-10-14T13:47:15+02:00"}