{"wiki":"en","slug":"dnake-a416-w","markdown":"\n\n# Setup Guide for the DNAKE Indoor Station A 416 W\n\n\nThis setup guide describes how to put a DNAKE indoor station A 416 W into operation together with a Behnke Station. The following assumes that the basic configuration of the DNAKE indoor station A 416 has already been completed, and we limit ourselves exclusively to the steps required to commission the Behnke Station. \n\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\n\n**Related setup guide(s) and notes**\n\nThe DNAKE indoor station A416 W and the Behnke Station must be in the same network to enable direct communication. \n\n\n\nHelp with configuring a static IP address on the DNAKE indoor station A416 W can be found in this setup guide.\n\n\n## 1. Setting up the Behnke Station\n\n- Open your browser\n- Open the web interface of the Behnke Station\n- Log in\n\n \n\n- In the sidebar on the left, click the menu item %BS_MENU_VERBINDUNG%\n- Navigate to the section **Cancel connection**\n- Set the option **Automatically after opening the access** to the value **yes**\n\n \n\n- In the sidebar on the left, click the menu item %BS_MENU_AKUSTIK%\n- Navigate to the section **IP audio**\n- Set the option **Expert settings** to the value **configure individually**\n\n\n \n- Further configuration options are displayed\n- Set the option **Receive gain** to the value **6 dB**\n\n\n\n- In the sidebar on the left, click the menu item %BS_MENU_SIP_TELEFON%\n- Navigate to the section **SIP direct calls**\n- Set the option **Allow SIP direct calls** to the value **yes**\n\n \n\n- Navigate to the section **SIP account 1** or **SIP account 2**\n- Set the option **Register** to the value **yes**\n\n- Use the assignments from the following table and enter the information in the corresponding input fields (in the section **SIP account 1**, or **SIP account 2** if applicable) of your Behnke Station.\n\n | Behnke Station field | Value |\n | -------------------------------- | --------------------- |\n | Phone number/user name | 100 |\n | User ID | 100 |\n | Password | 100 |\n | Server | IP address of the Behnke Station |\n\n \n\n- In the sidebar, click %BS_MENU_SPEICHERN_ROT%\n- Wait a moment until the Behnke Station is reachable again\n- If the registration is successful, the option **Registration status** changes to the value registered. If this is not the case, please check the previous steps again.\n\n \n\n- Navigate to the section **Early Media**\n- Set the option **For outgoing calls** to the value **reject**\n\n \n\n- In the sidebar on the left, click the menu item %BS_MENU_TASTEN%\n- Navigate to the section of the button to be configured, e.g. **Button 1**\n- Set the option **Action** to the value **Call**\n- Set the option **Phone number** to the IP address of your DNAKE device\n\n\n\n\n### Installation notes\n\n- Configure a static IP address for both devices or create a reservation based on the MAC address in your DNS server. This is important because the Behnke Station can only reach your DNAKE A416 W via direct IP dialing. Feel free to use our corresponding setup guide.\n- With group calls, an image preview is **not possible**.\n- Group calls with simultaneous connection of participants via a SIP server and via direct IP call are **not possible**.\n- If calls cannot be answered on the DNAKE indoor station, please reinstall the software.\n [Danke_A_461_Wiki.zip](uploads/e00ecadd8ad942793106c7faa14f5c03/Danke_A_461_Wiki.zip)\n\n\n## 2. FAQ\n\n%[NO_CONTENT](NO_CONTENT)%\n","lastModified":"2026-10-14T13:47:15+02:00"}